Supplies:

FSSK-1n Noel and FSSK-1hj Holiday Jester
Jet Black StazOn Ink
Printed Overlay
2 different ribbons
Flat Glass Ornament
Pigment Powder (like Pearl Ex)
Fine Glitter
Crystal Lacquer, Glossy Accents or Diamond Glaze
Xyron

Instructions:

1. Clean both sides of the ornament with glass cleaner to remove finger prints.
2. Stamp the images on the printed overlay using black ink.
3. Trace the ornament shape onto the overlay and trim.
4. Put the overlay through the Xyron face down.
5. Remove from backing paper and place the overlay onto the back of the glass ornament.
6. Turn the ornament over and put a layer of clear glaze on the overlay.
7. Sprinkle pigment powder into the glaze.
8. Add more glaze if necessary while arranging the colored powders.
9. Set aside to dry.
10. Add ribbon at the top of the ornament or tree hanger when ready.