My Prince Has Come Necklace and Earrings Set

Supplies:

• Fairy Song Small Frog Prince stamp
• 1 Domino - 1” x 2” (You may need to drill a small hole through from side to side.) I actually used 1 domino from a bracelet kit to match the earrings.
• Domino Earring kit - Mine came with the little red beads.
• 1 package of gold looped bottom jewelry wires.
• 18 Gauge Gold wire (Choose the gauge that works best for you)
• Alcohol inks (I used Butterscotch and Lettuce.)
• Necklace
• 1 pack small gold hearts
• Jewelry Pliers (2 pairs of choice)
• Split Rings - 2 small - 11 larger
• Gold Metallic Pen
• Gold Leafing Pen
• Alcohol Blending Solution
• Black Stazon Ink Pad
• Sharpie Markers (red & lime green)
• Glossy Accents dimensional medium

Directions:

1. Drop Alcohol Blending Solution onto 1 x 2 inch Domino.
2. Drop a couple drops of each Alcohol Ink color.
3. I prefer blowing on mine to move the inks around. Play with it until desired look is achieved. Do the same to the Dominoes from the earring kit. Let dry.
4. Stamp image onto the dominoes with Black Stazon Ink. Let dry.
5. Use Gold Metallic Pen on crown and to make a few waves in the corner.
6. Use Gold Leafing Pen around the edges of each domino.
7. Make the eyes red with the Red Sharpie Marker, and lightly go over the leaves and vines with the lime green.
8. Liberally apply Glossy Accents to cover top of all dominoes. Set aside and allow to dry completely.
9. In the meantime, For the necklace use jewelry pliers and add a heart to 11 split rings, and add a red bead to 2 of the heart split ring combos. Remove 2 sections of 4 links from chain, and add 1 heart, bead split ring combo to each at one end only.
For the earrings, add 1 heart to a small Split Ring and add this and 1 red bead to a larger Split Ring. Repeat for a 2nd piece.
10. After the dominoes have dried, take Gold Metallic Pen an trace the previous waves, over the top of the glossy accents. This gives it a cool 3-D look.
11. Cut 3 pieces of the wire. Approximately 6 inches.

Necklace Assembly

1. Thread 1 wire through large domino - Center domino on wire and bend up the wire on each side.
2. Take the chain and find the center link, add 1 heart Split Ring.
3. Place one side of the wire in the large domino into the 2nd link from Split Ring. Make a small loop about 1 inch from the end, and wrap wire around the long end. Repeat on remaining side of wire.
4. Attach the 4 link, heart, bead combo in second link from pendant, repeat for other side.
5. Add 4 Heart Split Rings spaced evenly on each side of chain heart, bead dangle.

Earring Assembly

1. Take out earring kit.
2. Thread 1 gold looped bottom jewelry wire through one of the finished dominoes. Using jewelry pliers, make a small loop close to the domino and wrap the remaining wire around the base of the loop. Attach to 1 earring hook. Repeat for second earring.
3. Attach 1 heart, bead combo in the loop at the bottom of an earring. Repeat for second earring.

VIOLA.. You now have created a wonderful set. Be proud, and strut your stuff ladies. .